|
MK Morse CSM72568TSC Metal Devil 7-1/4-Inch 68 Tooth Thin Steel Cutting Saw Blade with 5/8-Inch and Diamond Knockout Arbor
|
MSRP: $97.96
Your Price: $47.76
Savings: $ 50.20 ( 51% )
Shipping: Usually ships in 24 hours
Manufacturer: MK Morse
Prices subject to change. Please verify price during checkout.
|
|
MK Morse CSM72568TSC Metal Devil 7-1/4-Inch 68 Tooth Thin Steel Cutting Saw Blade with 5/8-Inch and Diamond Knockout Arbor Features
|
Cut through solid steel plate in less than 12 seconds
Hardened steel inner plate with unique combination tungsten carbide/titamium carbide tips brazed to the teeth
Metallurgy of the carbide tips transfers minimal heat to the inner plate for cooler, cleaner, safer cutting
Made in the USA
|
|
|
|
|
|
|
|
|
Additional MK Morse CSM72568TSC Metal Devil 7-1/4-Inch 68 Tooth Thin Steel Cutting Saw Blade with 5/8-Inch and Diamond Knockout Arbor Information
|
The Metal Devil saw blade is the fastest, easiest, and coolest way to cut through ferrous and nonferrous metals. Metal Devil blades have hardened steel plates for durability. The blades cut cool and do not transfer heat to the inner plate, so you can pick
|
|
|
What Customers Say About MK Morse CSM72568TSC Metal Devil 7-1/4-Inch 68 Tooth Thin Steel Cutting Saw Blade with 5/8-Inch and Diamond Knockout Arbor:
|
|
The blade DOES still spit hot steel chips out, especially when the blade starts to cut through a flat (tangent to the blade tips) section of panel, but works well through regular (perpendicular) cuts through the panels.I can still recommend this blade, but it is not the fantastic "end all" blade that is shown in the morse video.It still tends to emit sparks (although cooler and reduced quantities of incandescent chips). This blade does cut the metal, and tends to run cooler than other carbide tip saw blades. Purchased this blade to cut steel (Tin) roofing panels typically used here in Hawaii. This is the 7-1/4 diameter blade I use in a standard framing carpenters circular saw. It cuts much quicker that the electric nibblers I have seen used, and produces a cleaner cut edge.
I used this blade to cun Pro Panel style roofing material we were able to cut 4-6 pcs at a time and it was like cutting 1/4 " plywood .I highly reccomend this product.
|
|
 |
|
|
